AirValley All in one air source heat pump water heater, with R290 refrigerant, maximum water output temperature 75 deg C, A+ European energy efficiency.
Enamel inner tank.
How it Works - Heat Pump Water Heaters (HPWHs)
It's generally easier to move something than to make something. Putting that principle to use, HPWHs use electricity to move heat from one place to another instead of generating heat directly.
To understand the concept of heat pumps, imagine a refrigerator working in reverse. While a refrigerator removes heat from an enclosed box and expels that heat to the surrounding air, a HPWH takes the heat from surrounding air and transfers it to water in an enclosed tank.
During periods of high hot water demand, HPWHs switch to standard electric resistance heat (hence they are often referred to as "hybrid" hot water heaters) automatically. HPWH come with control panels that you to select from different operating modes.
Heat Pump: Energy-Efficient Alternative To An Electric Water Heater
* Heat Pump water heater is especially designed for domestic Hot water, it can save you 70%-80% heating cost compared with other heating elements.
* All in one design, easy installation, save space;
* Intelligent controlling system with easy operation LCD displayer
* Multi-protections including compressor high/low pressure protection, water flow protection, antifreeze protection and auto-defrosting function to ensure the heat pump a good working performance;
* Protecting Environment. There isn't any burning gas from the water heater. The refrigerant won't contaminate the Ozonosphere. So it benefits the society;
* Supply water anytime, and not be affected by geographical and weather changing.
* User-friendly to operate the Heat Pump. Wifi smart control available.
Product AdvantageThe advantage of mircochannel coil Mircochannel coil (AirValley) VS Copper coil (other manufacturers)
| R134A/R290 All In One Heat Pump |
| Model |
YT-200TB1 |
YT-300TB1 |
YT-200TB2 |
YT-300TB2 |
| Power Supply |
220~240V/1/50Hz |
220~240V/1/50Hz |
220~240V/1/50Hz |
220~240V/1/50Hz |
| Rated Heating Capacity(kW) |
2.4 |
2.4 |
2.4 |
2.4 |
| Refrigerant |
R134a |
R134a |
R290 |
R290 |
| Tapping Cycle |
L |
XL |
L |
XL |
| Energy Efficient Class |
A+ |
A+ |
A++ |
A++ |
| Energy Efficient ηwh (%) |
148.9 |
142 |
154.5 |
168.7 |
| **COP (EN16147) |
3.48 |
3.52 |
3.75 |
3.81 |
| Tank Capacity (L) |
200 |
300 |
200 |
300 |
| Air Flow (m³/h) |
450 |
450 |
450 |
450 |
| Air Discharge |
Vertical |
Vertical |
Vertical |
Vertical |
| Air Duct Diameter (mm) |
φ150 |
φ150 |
φ150 |
φ150 |
| Auxiliary electric heater(kW) |
2 |
2 |
2 |
2 |
| Default Water Temperature(ºC) |
55 |
55 |
55 |
55 |
| Working Temperature Range(ºC) |
-7ºC-43 |
-7ºC-43 |
-7ºC-43 |
-7ºC-43 |
| Unpacked Dimension (mm) |
Φ620*1672 |
Φ620*1672 |
Φ620*1672 |
Φ620*1937 |
| Packed Dimension (L*W*H)(mm) |
700*700*1790 |
700*700*1790 |
700*700*1790 |
700*700*2050 |
| Net Weight(kg) |
110 |
110 |
110 |
130 |
| Gross Weight(kg) |
125 |
145 |
125 |
145 |
| Noise(dB(A)) |
46 |
46 |
46 |
46 |
AirValley is a heat pump manufacturer focusing on OEM and ODM. We have excellent R&D engineers and cooperate with excellent components manufacturers to provide customers with cost-effective products, and can provide customized services according to customer requirements.
All of our current sales and R&D engineers have worked in the heat pump industry for more
than 10 years, and we can provide professional and timely products and services. We have set up a professional 15HP heat pump laboratory, and at the same time have strategic cooperation with Dan-foss China. All DC Inverter commercial units have been tested for a long time in Dan-foss local laboratory to ensure the product's ultra-high performance and strong stability.
We look forward to working with you!
Advanced Production Line
Work flow chart
The cooperation of Dan-foss & AirValley
The commercial DC Inverter heat pump were supported by Dan-foss, the heart of heat pump - Compressor comes from Dan-foss, and the
economizer of EVI system comes from Dan-foss too, Not only that, Dan-foss help AirValley to test commercial DC Inverter heat pumps in Dan-foss
laboratory.
Advanced Laboratory
-35ºC 15HP heat pump performance laboratory Dan-foss laboratory in Haiyan China
Ultra-low temperature laboratory, Dan-foss Enthalpy difference laboratory,
Dan-foss data monitoring center, long-term operation laboratory.
Testing temperature from -40ºC ~55ºC
Maximum heat pump can be tested up to 300kW
Q: What is the advantages of Air Source Heat Pump?
A: 1. High energy saving efficiency
Direct heating by electric energy is relatively inefficient, and one kilowatt-hour of electricity can only produce one share of heat energy, which is one of the reasons for the high electricity bill when electric heating is used in winter. The working principle of the air source heat pump is slightly different. The compressor is driven by low power to absorb the low-grade heat energy in the air and convert it into high-grade heat energy, which is then used for indoor heating. Consuming 1 degree of electricity can get more than 3 parts of heat energy. Therefore, the electric energy consumed by the air source heat pump to produce the same heat is very low, and it is a very efficient energy-saving heating equipment.
2. High environmental protection and safety
When the air source heat pump is working, it only consumes electric energy and does not rely on natural gas, coal, oil and other non-renewable resources. Therefore, there will be no open flames, no pollutant emissions, and no pollution to the environment. It is highly environmentally friendly. At the same time, the power system of the air source heat pump is concentrated in the outdoor unit, and the heat is transmitted to the room through water, so that water and electricity can be separated, and the room will not be exposed to the power supply, which has good safety. Compared with other heating equipment, it can avoid fire and explosion. , poisoning, electric shock and other risks. Even if the fan coil unit is used for heating in winter, it will not bring danger indoors. The indoor pipes are full of water. If there is leakage, it will only wet the ceiling, and there will be no leakage of refrigerant from the fluorine air conditioner, which will reduce the fluoride content in the room. If it is too high, it will affect your health.
3. Low cost of use
The air source heat pump uses 1 kilowatt-hour of electricity to generate 3 parts of heat energy. Compared with air conditioning and electric heating, it can save 2/3 of the cost of use, and can save 1/2 of the cost of gas wall-hung boiler heating. Compared with central heating, it can also About 30% cheaper. If the heating area is 100 square meters, using air conditioners and electric heaters, the cost of day and night operation is at least 3,000 yuan, and the use of gas wall-hung boilers for heating is also day and night operation, and the cost is about 1,500 yuan. 500 yuan is enough. Of course, the cost cannot be compared with coal-fired heating, but it is higher than coal-fired heating in terms of energy cleanliness, cleanliness, convenience, and sanitation.
4. High heating comfort
The air source heat pump mainly uses the water system to work, and the heating end can be carried out through fan coils, floor heating and radiators. In terms of comfort, floor heating is well-deserved first. The indoor coils are evenly laid, and the temperature is evenly dissipated. High transmission, heat the feet first and then the body, so that the temperature feeling of warming the feet and cooling the roof is the most comfortable heating solution at present.
Not only that, the air source heat pump is also very comfortable when cooling in summer. Chilled water is generated by the heat pump host and circulated to the indoor fan coil for heat exchange. The indoor temperature is very constant (the inertia of water), and the outlet air temperature of the water system air conditioner is only 12°C-15°C, compared with fluoride air conditioners At a low temperature of 7°C-10°C, the air outlet is softer, the air outlet temperature is higher, the temperature fluctuation is smaller and the impact on humidity is smaller.
5. Wide range of use
Air source heat pumps use low electric energy to absorb heat in the air, and can be used as long as there is electricity, water, and air (the temperature is above -25°C), and are not affected by light and energy, and are less affected by the environment . The application of the air source heat pump to the air injection enthalpy increase technology makes the ability to adapt to the ambient temperature stronger, and it can be heated at -35°C-48°C, which can meet the use in most regions of the world.
6. Good stability
All the refrigerants used by air conditioners are fluorides, while the refrigerants used by air source heat pumps include fluorides and water. Fluorides are used in the main unit and water is used in the indoor part. In contrast, water is more inert and can last longer. The heat absorbed by the air energy heat pump can be stored in the water for a longer period of time, making the indoor temperature more constant, and reducing the frequent operation of equipment, so that it can be more energy-saving while maintaining stability.
7. Strong intelligent ability
The air source heat pump host is controlled by a microcomputer. When debugging, set the required parameter configuration, and the host will automatically adjust the amount of water replenishment, heating, power-off protection, water tank insulation and Heating and other work do not require complex operation control panels, and the air source heat pump can be connected to the smart 485 interface, and the air source heat pump system is compatible with the intelligent equipment of the whole house to realize remote intelligent control.
8. Long service life
The service life of gas water heaters is about 8 years, and the service life of gas wall-hung boilers can reach 15 years, but the gas quality and water quality must be good, otherwise the service life of the equipment will be scrapped after a few years of use. However, the design life of the core components of the air source heat pump is more than 15 years, which can cope with the impact of power aging and scale problems. Of course, regular maintenance can also increase the service life of the equipment.
9. Simple installation conditions
Although the air source heat pump is relatively large in size, it has certain installation space requirements. However, the installation of air source heat pumps is not limited by geology, pipelines and energy supply. The normal operation of the main engine can be realized in places with air circulation, and there is no excessive demand for power equipment, which is equivalent to the power distribution of ordinary air conditioners. Don't worry The troubles caused by insufficient power at home and capacity expansion can be used in large and small houses.
Q: How to become a AirValley partner?
A: It's very simple, just place an order with us and you are our partner.
If you want to become our local agent, you need to reach a certain order volume and then sign an agency agreement with us. For agents, we have better terms of service. for example:
1.The best product price;
2.Priority production arrangements;
3.Rich product training;
4.First-hand new product consultation;
5.Free brochure design;
6.More timely email reply and so on.
Q: What is the delivery time?
A: Sample order 35~45 days after receiving deposit; Bulk order 25~40 days after receiving deposit.
Q: What is the warranty time?
A: We give two years warranty time after shipping time.
During the warranty time, we can supply free spare parts if any problem casued by AirValley.
Air to water heat pump, Air source heat pump, Heat pump water heater, DC Inverter heat pump, Water source heat pump
){kind=link}