R32 20kw Advanced 3 Phases Split Type DC Inverter Air to Water Heat Pump

• Customization: Available
• Energy Efficiency Grade: One
• Heat Temperature: 50-70°C
• Model NO.: DFC20I/BPF
• Heat Source: Air-source
• Heating Type: Circulating Heat
• Application: Villa Family, Sauna and Swimming Pool, Hotels, Factory Hospital, Student Apartments, Beauty Salons
• Certification: CE, ISO9001, CCC, CB, RoHS, SASO
• Compressor: Mitsubishi DC Inverter
• Refrigerant: R32
• Fan Motor: DC-Brushless
• Water Pump: DC Inverter
• Master-Slave: Yes
• WiFi: Yes
• Transport Package: Wooden Case
• Specification: 20KW
• Trademark: AirValley
• Origin: China
• HS Code: 8418612090
• Production Capacity: 3000 Units/Month
• Package Size: 115.00cm * 48.00cm * 145.00cm
• Package Gross Weight: 125.000kg

Product Description

 Residential Split DC Inverter EVI Air to water heat pump for heating + cooling + hot water,
Mitsubishi/GMCC DC Inverter compressor & R32 refrigerant,
Lowest working ambient temperature -35 deg C

Product Description

Details of Mitsubishi DC Inverter compressor

FULL DC INVERTER TECHNOLOGY

DC Inverter compressor + DC Brushless fan motor + DC Inverter circulation pump

3 functions, 5 modes:

Heating,
Cooling,
Domestic Hot Water, 
Heating + DHW,
Cooling + DHW

High energy efficiency
Heating energy efficiency level A+++ at water temperature 35 deg C

Heating energy efficiency level A++ at water temperature 55 deg C

Equipped with EVI technology

Stable operation at ambient temperature -35ºC

Wide running range, from -35ºC to 43ºC

 

Indoor unit Built-in hydraulic module

The water system of the indoor unit is fully equipped (DC Inverter water pump, water flow switch and other hydraulic modules are built-in such as electric heater, expansion tank and Y-shaped filter), which can effectively reduce the installation time and space of the water system and save installation costs.

User-friendly Controller

Two controllers for option. 

Wifi function for option

Control your heat pump in your smartphone anywhere, anytime.


DC brushless motor

The high-quality DC speed-regulating motor can intelligently adjust the air volume and air pressure according to the load conditions to ensure good ventilation, and at the same time reduce power consumption by more than 30% compared with AC motors.

Water side heat exchanger

A high-efficiency plate heat exchanger is adopted, and multi-layer thin rectangular channels are formed between the plates of the heat exchanger, and the refrigerant and water exchange heat through the plates. Due to the multi-channel distribution of the fluid, the heat exchange area is greatly increased, thereby greatly improving the heat exchange efficiency.

Low Noise

With the help of Full DC Inverter technology and the sound insulation covering of the whole machine, greatly reduces the noise of the unit.

 

Company Profile

is a heat pump manufacturer focusing on OEM and ODM. We have excellent R&D engineers and cooperate with excellent components manufacturers to provide customers with cost-effective products, and can provide customized services according to customer requirements.

All of our current sales and R&D engineers have worked in the heat pump industry for more

than 10 years, and we can provide professional and timely products and services. We have set up a professional 15HP heat pump laboratory, and at the same time have strategic cooperation with Dan-foss China. All DC Inverter commercial units have been tested for a long time in Dan-foss local laboratory to ensure the product's ultra-high performance and strong stability.

We look forward to working with you!

Our Advantages

Advanced Production Line

Work flow chart

The cooperation of Dan-foss & AirValley

The commercial DC Inverter heat pump were supported by Dan-foss, the heart of heat pump - Compressor comes from Dan-foss, and the

economizer of EVI system comes from Dan-foss too, Not only that, Dan-foss help AirValley to test commercial DC Inverter heat pumps in Dan-foss

laboratory.

Advanced Laboratory
-35ºC 15HP heat pump performance laboratory     Dan-foss laboratory in Haiyan China

Ultra-low temperature laboratory, Dan-foss Enthalpy difference laboratory,

Dan-foss data monitoring center, long-term operation laboratory.

Testing temperature from -40ºC ~55ºC

Maximum heat pump can be tested up to 300kW
 

Product Parameters

DIS32 series Full DC Inverter air to water heat pump for Cooling & Heating & DHW(Split type R32)
Model			DFC10I/BPF	DFC15I/BPF	DFC16I/BPF	DFC20I/BPF	DFC16II/BPF	DFC20II/BPF
Rated heating             (A7 W45)	Heating capacity	kW	10.00	15.00	16.00	20.00	16.00	20.00
	Input power	kW	2.81	4.36	4.55	5.70	4.55	5.68
	COP	W/W	3.56	3.55	3.52	3.51	3.52	3.52
Nominal heating                    (A-12 W41)	Heating capacity	kW	8.00	10.00	11.50	14.50	11.50	14.50
	Input power	kW	3.48	4.48	5.11	6.02	5.11	6.02
	COP	W/W	2.30	2.23	2.25	2.41	2.25	2.41
Low temp. heating                                    (A-20 W41)	Heating capacity	kW	6.20	9.10	9.40	12.50	9.40	12.50
	Input power	kW	3.02	4.44	4.56	6.25	4.56	6.25
	COP	W/W	2.05	2.05	2.06	2.00	2.06	2.00
Rated cooling             (A35 W7)	Cooling capacity	kW	12.00	14.00	15.50	19.50	15.50	19.50
	Input power	kW	4.07	4.75	5.34	6.63	5.34	6.63
	EER	W/W	2.95	2.95	2.90	2.94	2.90	2.94
Power supply		V/Ph/Hz	220V/1/50Hz				380V/3/50Hz
Maximum input power  (without electric heating)		kW	5.2	5.5	6.6	10.5	6.6	10.5
Maximum input current (without electric heating)		A	24	25.5	30	48	12.6	20
Maximum outlet water temp. (without electric heating)		ºC	58ºC
Operation temp. range		ºC	-35~43ºC
Fan Motor		Type	DC BRUSHLESS
Refrigerant		Type	R32
Outdoor unit	Unit dimensions	mm	1100/460/731	1200/460/1025	1100/460/1403
	Net weight	kg	75	80	100	125	100	125
	Gross weight	kg	85	90	110	145	110	145
	Noise level	dB(A)	≤59	≤60	≤58	≤62	≤58	≤62
Indoor unit	Head outside the unit	m	10.1	8.3	7.8	8	7.8	8
	Water flow required	m3/h	1.92	2.32	2.67	3.35	2.67	3.35
	Water inlet/outlet pipe	DN	DN32
	Unit dimensions	mm	500*330*760
	Net weight	kg	45	48	50	53	50	53
	Gross weight	kg	48	51	53	56	53	56
Test conditions: - Rated heating: Inlet/outlet water temperature 40ºC/45ºC. Dry bulb/wet bulb temperature 7ºC/6ºC; - Nominal heating: water inlet/outlet temperature -/41ºC. Dry bulb/wet bulb temperature -12ºC/-14ºC;  - Low temperature heating: water inlet/outlet temperature -/41ºC. Dry bulb/wet bulb temperature -20ºC/--;  - Rated cooling: water inlet/outlet temperature 12ºC/7ºC. Dry bulb temperature 35ºC.

FAQ

Q: What is a DC inverter air source heat pump?

A: A DC Inverter air source heat pump refers to a heat pump unit that uses a DC frequency conversion control system to control the corresponding DC frequency conversion compressor, DC fan and water pump. Not only the energy saving effect is good, but also the use efficiency is very high.
 

Q: Why DC inverter heat pump?

A: 1. DC inverter heat pump is more energy-saving.

In fact, DC Inverter and fixed speed heat pumps are both energy-saving products, and the biggest difference between the two is that the working mode of DC Inverter air source heat pump is more efficient than the fixed speed heat pump. When the ambient temperature is minus 15 degrees, the working efficiency of the DC Inverter and fixed speed air source heat pumps is basically the same. And when the ambient temperature drops to minus 10 degrees, the DC Inverter air source heat pump can follow the difference in ambient temperature, automatically adjust the compressor and fan speed, and realize stepless variable speed adjustment, so that energy can be fully utilized. From this point of view, frequency conversion Air source heat pumps are more efficient.

2. The temperature is more stable.

After the water temperature reaches the set temperature, the DC inverter heat pump will not stop running like the fixed speed air source heat pump, but will run at a lower frequency to maintain the set temperature, especially when providing heating (cooling) for the family. It can control the amount of heating (cold) by changing the speed of the compressor. The fixed-frequency air source heat pump maintains the set temperature by repeatedly starting and stopping the compressor. The temperature difference fluctuates greatly, and the water temperature fluctuates, so the room temperature may be overcooled or overheated.

 

Q: How to become a AirValley partner?

A: It's very simple, just place an order with us and you are our partner.

If you want to become our local agent, you need to reach a certain order volume and then sign an agency agreement with us. For agents, we have better terms of service. for example: 
1.The best product price; 
2.Priority production arrangements; 
3.Rich product training; 
4.First-hand new product consultation; 
5.Free brochure design; 
6.More timely email reply and so on.
 

Q: What is the delivery time?

A: Sample order 35~45 days after receiving deposit; Bulk order 25~40 days after receiving deposit.
 

Q: What is the warranty time?

A: We give two years warranty time after shipping time.
During the warranty time, we can supply free spare parts if any problem casued by AirValley.
 

Air to water heat pump, Air source heat pump, Heat pump water heater, DC Inverter heat pump, Water source heat pump