132kw High Temperature Water to Water Heat Pump 60Hz for Option

Product Description

 High temperature Water source heat pump water heater, With R134A refrigerant, Low pressure, maximum water output temperature 80 deg C.

Product Description

Modular design, more flexible installation

Unit modules of different capacity specifications can be freely combined, and a maximum of 16 units can be connected in parallel, with strong compatibility and scalability. According to the site characteristics of the installation site, the user can choose a variety of combination connection methods to realize the parallel use of 1-16 modules, and the maximum cooling capacity is as high as 2080kW, fully meeting different needs. The air source module units of the same system are started in stages and run in a balanced manner, reducing the impact of the starting current of the units on the power grid.

Modular rotation work

According to the load conditions of the system, the unit rotates the module units that are turned on first, and distributes the running time of each module unit in a balanced manner, which greatly improves the reliability and service life of the unit.


Building intelligent control to improve management reliability
Modbus is an open protocol that is widely used, especially in BMS building control systems. The unit can be connected to the BMS system through the Modbus protocol to realize remote control of multiple air cooling and heat pump modules.

 

Copeland or Panasonic compressor: "Small size" "Big horsepower"!

Relying on the mature technology of B series. More optimized motor design.

Excellent vibration and noise characteristics.

High reliability bearings, increased oil pool volume.

Multiple protection functions

To ensure the safe operation of the system, a modular structure is adopted, and the units are started in stages to reduce the impact of the starting current of the units on the power grid. The unit is equipped with high and low pressure switches, antifreeze protection devices, water flow switches, overload protection devices, power supply phase sequence protection devices, etc., and is equipped with an operation control device. When a fault occurs, the controller will automatically alarm in real time.

Wifi function for option

Control your heat pump in your smartphone anywhere, anytime.

High precision electronic expansion valve
High precision electronic expansion valve: use electronic expansion valve for controlling, reach 500 steps adjustment, adjust super heat degrees accurately, achieve high efficiency operation system.

 

Gas-liquid separator

A large gas-liquid separator is used to prevent liquid from entering the compressor under low temperature conditions, ensuring more reliable system operation

Water side heat exchanger

High-efficiency shell & coil heat exchanger with both cooling and heating is adopted, with water in the tube and fluorine outside the tube. High heat exchange efficiency, small size, excellent water quality, strong antifreeze ability, stable and reliable.

 

Electric control

The electric control adopts famous and high-quality components, and the quality is guaranteed; at the same time, the electric control box is set on the front, which is quick to install and easy to maintain.

Company Profile

is a heat pump manufacturer focusing on OEM and ODM. We have excellent R&D engineers and cooperate with excellent components manufacturers to provide customers with cost-effective products, and can provide customized services according to customer requirements.

All of our current sales and R&D engineers have worked in the heat pump industry for more

than 10 years, and we can provide professional and timely products and services. We have set up a professional 15HP heat pump laboratory, and at the same time have strategic cooperation with Dan-foss China. All DC Inverter commercial units have been tested for a long time in Dan-foss local laboratory to ensure the product's ultra-high performance and strong stability.

We look forward to working with you!

Our Advantages

Advanced Production Line

Work flow chart

The cooperation of Dan-foss & AirValley

The commercial DC Inverter heat pump were supported by Dan-foss, the heart of heat pump - Compressor comes from Dan-foss, and the

economizer of EVI system comes from Dan-foss too, Not only that, Dan-foss help AirValley to test commercial DC Inverter heat pumps in Dan-foss

laboratory.

Advanced Laboratory
-35ºC 15HP heat pump performance laboratory     Dan-foss laboratory in Haiyan China

Ultra-low temperature laboratory, Dan-foss Enthalpy difference laboratory,

Dan-foss data monitoring center, long-term operation laboratory.

Testing temperature from -40ºC ~55ºC

Maximum heat pump can be tested up to 300kW
 

Product Parameters

WS80 Series High Temperature Water Source Heat Pump Water Heater
Model			WRS-8IG	WRS-14IG	WRS-8IIG	WRS-14IIG	WRS-19IIG	WRS-28IIG	WRS-40IIG	WRS-50IIG	WRS-65IIG	WRS-85IIG	WRS-100IIG	WRS-130IIG
Rated heating capacity		KW	8.5	14	8.5	14	19	28	40	50	66	84	100	132
Rated power		KW	1.91	3.10	1.90	3.07	4.21	6.19	8.97	11.29	14.83	18.96	22.42	29.86
Rated current		A	8.36	13.61	3.57	5.77	7.92	11.65	16.86	21.22	27.88	35.65	42.15	56.14
Maximum power		KW	2.44	3.97	2.43	3.93	5.39	7.93	11.48	14.45	18.98	24.27	28.70	38.23
Maximum current		A	11.35	18.48	4.60	7.43	10.19	14.99	21.70	27.30	35.88	45.87	54.24	72.25
Performance coefficient		COP	4.46	4.51	4.47	4.56	4.51	4.52	4.46	4.43	4.45	4.43	4.46	4.42
Rated hot water yields	△t40	L/H	183	301	183	301	409	602	860	1075	1419	1806	2150	2838
	△t60	L/H	122	201	122	201	272	401	573	717	946	1204	1433	1892
Setting water temperature		ºC	70ºC(default)  28-80ºC(adjustable)
Power supply			1N 220V/50Hz		3N 380V/50Hz
Compressor	Type		Rotary	Hermetic scroll type
	Quantity	Unit	1	1	1	1	1	2	2	2	2	3	3	4
	Start mode		Direct(Soft start for option)
Application side heat exchanger	Type		Shell & tube heat exchanger (Tube in tube heat exchanger or Plate type heat exchanger for option)						Shell & tube heat exchanger
	Water flow	M3/h	1.5	2.4	1.5	2.4	3.3	4.8	6.9	8.6	11.4	14.4	17.2	22.7
	Water pressure drop	KPa	≤50	≤50	≤50	≤50	≤50	≤50	≤60	≤60	≤70	≤70	≤70	≤70
	Pipe connection	DN	DN25	DN25	DN25	DN25	DN25	DN32	DN50	DN50	DN50	DN65	DN65	DN65
	Pipe type		Inner thread						Flange
Heat source side heat exchanger	Type		Shell & tube heat exchanger
	Water flow	M3/h	1.1	1.9	1.1	1.9	2.5	3.8	5.4	6.7	8.8	11.3	13.4	17.7
	Water pressure drop	KPa	≤50	≤50	≤50	≤50	≤50	≤50	≤60	≤60	≤70	≤70	≤70	≤70
	Pipe size	DN	DN25	DN25	DN25	DN25	DN25	DN32	DN50	DN50	DN50	DN65	DN65	DN65
	Connection type		Inner thread						Flange
Protections			1. High and low pressure protection, 2. Anti-freeze protection, 3. High temperature protection, 4. Overload protection, 5. Reverse of phase protection, Lack of phase protection, etc.
Refrigerant	Type		R134A
	Quantity(KG)		2.2	3.3	2.2	3.3	4.2	3.3x2	6.5x2	8x2	8.8x2	8.2x3	8.8x3	8.8x4
Noise		DB(A)	≤53	≤55	≤55	≤55	≤58	≤58	≤62	≤65	≤65	≤70	≤75	≤75
Net weight		KG	68	95	65	95	135	195	320	480	885	985	1180	1210
Gross weight		KG	78	105	75	105	145	215	340	515	920	1020	1215	1245
Unit dimensions		MM	956x556x680					1050x840x800		1650x1050x1200			2000x1100x1250
Note: 1. Hot water heating standard condition: use side initial water temperature 15ºC, end water temperature 75ºC;  heat source side water input temperature 15ºC.
2. The above parameters are based on refrigerant R134A, for parameters based on other refrigerant please contact us.

FAQ

Q: What are the advantages of water source heat pumps?

-------------------------------------------------------------------- A: Water source heat pumps are low-grade thermal energy resources formed by using shallow surface water sources, such as solar energy, groundwater, rivers, and geothermal energy absorbed by lakes. Based on the heat pump principle, through a small amount of electrical energy input, the low-level thermal energy is converted into high-level thermal energy technology.

 

1. Water source heat pump is a renewable energy utilization technology.

2. High operating efficiency, low cost and energy saving.

The available water temperature of the water source heat pump unit in winter is 12-22, which is higher than the outdoor air temperature in winter, and the evaporation temperature and energy efficiency ratio of the heat pump cycle are improved. Compared with electric heating, a well-designed water source heat pump unit can reduce power consumption by more than 70%.

3. Stable and reliable operation

The temperature of water bodies is relatively stable all year round, especially groundwater, whose fluctuation range is much smaller than that of air, and is a good cold and heat source for heat pumps. Therefore, the operation of the heat pump unit is reliable and stable, and there is no problem such as defrosting of the air source heat pump in winter.

4. Significant environmental benefits

The water source heat pump unit has no pollution in operation and can be built in residents' homes without combustion, smoke exhaust, waste, no need to pile up fuel waste sites, and no need for long-distance heat transfer.

5. One machine with multiple functions, wide application range

The system can provide heating, cooling and domestic hot water. One machine with multiple functions, one system can replace two sets of boilers and air conditioners. Especially for buildings with both heating and cooling requirements, it has obvious advantages. It not only saves a lot of energy, but also reduces the initial investment of equipment.

6. Available water sources

In theory, water source heat pumps can utilize all water resources. In fact, in actual engineering, the cost of using different water resources is very different. Therefore, whether there are suitable water sources in different regions becomes the key to the application of water source heat pumps. The ability to find a suitable water source becomes the limiting condition for using water source heat pumps, and the water source requirements must meet certain temperature, water volume and cleanliness.

7. The geographical structure of the water layer

To use groundwater recharge, the geological structure must be considered to ensure that wells are drilled under economical and reasonable conditions, to find a suitable water source, and to realize recharge at the same time.

Water source heat pump technology is not only widely used in all kinds of civil buildings, public buildings, and other central air-conditioning systems that need cooling and heating to supply hot water for bathing, but also involves freezing, refrigeration and cooling process systems in the industrial field, becoming an energy-saving One of the important technologies for emission reduction.

 

Q: How to become a AirValley partner?

A: It's very simple, just place an order with us and you are our partner.

If you want to become our local agent, you need to reach a certain order volume and then sign an agency agreement with us. For agents, we have better terms of service. for example: 
1.The best product price; 
2.Priority production arrangements; 
3.Rich product training; 
4.First-hand new product consultation; 
5.Free brochure design; 
6.More timely email reply and so on.
 

Q: What is the delivery time?

A: Sample order 35~45 days after receiving deposit; Bulk order 25~40 days after receiving deposit.
 

Q: What is the warranty time?

A: We give two years warranty time after shipping time.
During the warranty time, we can supply free spare parts if any problem casued by AirValley.
 

Water to water heat pump, Geothermal heat pump, Air to water heat pump, Air source heat pump, Heat pump water heater, DC Inverter heat pump, Water source heat pump